The yellow arrow points to a leather cord tied similar to a poacher’s knot to have an end loop.
The red arrow are ends of an elastic string which passes through a hole (one for each end) in the leather.
I need to tie the elastic string ends in such a way to secure both the leather cord, and on itself so that when the elastic is pulled, it will not stretch. Also it should be hard but not impossible to untie.
Also it should not be too bulky.
As a bonafide Eagle Scout, I remain firmly convinced that any rope tying needs can be met with a combination of square knots and more rope. 🤣
A flat overhand bend in the elastic cord is what I recommend: https://www.animatedknots.com/flat-overhand-bend-knot
Justification:
Simple, not bulky, reasonably secure against shaking loose, and relatively easy to untie.As suggested in another comment, a double figure eight could be used as well. It will be more bulky and a bit less likely to come loose.
would I be able to cut the ends and it won’t come loose?
If you want to be able to trim off the ends, I suggest a double fisherman’s instead (aka the double overhand stopper) with both strands (hold them together while you tie and treat them as a single strand).
https://www.animatedknots.com/double-overhand-stopper-knot
With either knot, after you trim, you can melt the ends of the elastic cord. It will “mushroom” a bit, which will also prevent the tips from creeping into the knot and coming loose.
I’ll try this, thank you
It looks to be secured already. Are you looking to anchor this to something?
I forgot to add, I have to cut the elastic string short, so everything would come off. So I need to a knot or something to secure the elastic strings.