• 1 Post
  • 103 Comments
Joined 3 years ago
cake
Cake day: June 25th, 2023

help-circle

  • They might not be accepted anywhere locally. I’m fortunate enough to have curbside collection where I am but it is limited to cans, bottles (glass and rigid plastic), and paper products (cardboard, newspaper, egg cartons and such). If I had to guess, soft plastics like those and plastic grocery bags end up gumming up the gears, rollers, etc at the sorting facilities. I think there’s maybe only one grocery store near me that actually still has a bin for plastic grocery bags. There was another but… “tragedy of the commons.” They had three big bins for glass, plastic and paper, and a small one for bags. Uncouth people kept using them all to toss whatever trash they had on hand or in their vehicles. I watched the small one get used for an ashtray/cigarette butts. Eventually the store just got rid of them.


  • Not sure about them but I’ve an anecdote:

    A few years back they had a batch of bad boards for washers across all their brands. Any of the cheaper/lower end models with the simple dial and five (or six?) green LED lights to indicate the current cycle. Specifically it was a bad pressure sensor for detecting fill level. It’d fail and then the washer would run the pump non-stop trying to expel water that wasn’t there. Some folks ended up with burnt out pumps on top of the bad board as a result.

    Our Amana failed in under a year. Whirlpool eventually put out a service bulletin about it and replacement boards would be provided free if a tech found them to be needed. The boards were backordered unobtanium and cost nearly the price of the washer so that DIY route was closed. It also meant techs probably wouldn’t have new boards on their vans, so two service calls guaranteed. If I recall, the TSB didn’t waive call-out/labor so once again we’d be looking at over half the cost of the machine even without paying for the board. I was livid.

    Eventually I found a few YouTube repair videos, almost all of which pointed to someone who’d made a side gig out of the fiasco by hocking new sensors for $25 a pop. Guess they were the quickest and became the de facto source. So I ordered one, some wick and wire, and picked up my iron for the first time in years. It was ugly but the washer has been working ever since, no thanks to Whirlpool.



  • Nullsoft’s streaming server? I ran a web radio stream for a small group of friends for a short time using it. Pretty sure the only reason I ever became aware of it was Winamp’s built-in station browser. It made me wanna learn how it worked. I can’t remember anymore but I assume Shoutcast must’ve had a “publish” type option to make them show up in the list. That stream browser also introduced me to the demoscene (there was a website that broadcast various demos) and expanded my tastes in music across so many genres. RIP to Wazee and Digital Gunfire. At least SomaFM and Digitally Imported are still hanging on.

    Do you remember RipCast? Before I learned where else to look, and when #mp3z on IRC failed me, I’d use it just to be able to save those unobtainable songs. Like a digital equivalent to leaving a cassette recording the radio in hopes of snagging a few songs you wanted to keep.


  • Northern Virginia and most Maryland counties, excepting a few rural ones like St. Mary’s County, require regular vehicle emissions testing. If the vehicle can’t pass it can’t be on the road, and with those a check engine light is an automatic fail. There’s a grace period and some leeway as far as possible waivers but an engine light can definitely lead to suspension of the registration. Virginia also does annual safety inspections. The light isn’t an automatic fail for those but if it somehow relate to safety it’s a fail.


  • Homebox and its QR Codes with a brief description on the labels would be my go-to. It’d save regularly replacing labels any time something is moved or tossed. I’m using it just to track my tools so far. I define locations (basement, shed, truck, tool cart, tool bag), and assets (long nose pliers, scan tool, cordless ratchet), and assign those assets to locations. Locations can be sub-locations of another location; so my tool bag could be in my truck or it could be in my basement. I’ve got a handful of tools tagged as “road kit.” When I take them from my cart and put them in my road bag, I search that tag, select all and bulk update their location from the tool cart to the bag (and the bag’s location from the house to my truck). As long as I’m not lazy about updating I can always find where I last left any tools.

    For containers I’d create a location for each tote. Homebox automatically generates QR codes for them. I’d run those onto labels a la “QR, Tote 1, Lego”, “QR, Tote 2, Random Cables,” “QR, Tote 3, Xmas Decorations” and so on. A quick scan of a code pulls up that tote’s page in Homebox to see the exact contents. The most tedious part is taking the time to actually organize and catalog all your existing assets. I’d put it up there with using Picard or Beets to work through a massive digital music collection - it takes a lot of initial time but adding new things later is fast and the payoff is meaningful organization.




  • I’m not too familiar with Blink products, just that a wall wart bell showed up in a quick search, so it is possible. Most camera doorbells I’ve seen that do have a pair of terminals, they’re to do as you described: connect to the bell circuit to get power and ring the existing bell. I’m doing a bit of inferring, since knocking sounded like the only previous option, that there’s no wire at their door to utilize. Couple that with their being in an apartment and it is likely the only way they’re getting one there is to surface run it. Or run behind any crown molding/baseboard trim they have, but that’s a labor-intensive pain in the ass.


  • They don’t have a traditional doorbell which is why people previously knocked. Since they added the Blink doorbell, people ring the bell. Except there is no bell apart from the speaker built into the Blink… outside the front door… where it can’t be heard by people inside. So you can’t know if someone has rung the bell without having a phone on you to receive the notification. Blink sells a chime that can just be plugged into an outlet. Doesn’t have the best reviews but I would’ve given that a shot first. Maybe it isn’t sold in their market or something.


  • What you’re describing works but probably not for me as you acknowledge. The “PC loses AC while running” part is what I actively try to avoid as part of the greater goal of minimizing risk of damage/data loss. It might be superstitious at this point, modern hardware and filesystems being a bit more resilient, but I feel better not risking it. Since I’m shutting down before the UPS battery dies, and power could restore before it does, there’s a real chance power will never be totally lost as far as the motherboard sees it. In that case a boot on AC restoral won’t get triggered. Otherwise I agree. It’s a lot of work. Or rather a lot of research, RTFM, and understanding before you can even do the a little bit of work to implement it.


  • I was actually working on an edit to further clarify but that context helps. You’d think for a single machine, just run NUT (or whatever) directly on said machine. The two big reasons, even in that case, for using NUT on a RPi or other low power machine are actually what my edit was going to address: Power Consumption and Wake on LAN. After shutting down any power hog server(s) a decent UPS can probably keep a Pi Zero and travel router running for half a day. Ideally long enough to send a WoL packet to the server(s) once the UPS says power is restored. That can be pretty important, even in a “single” (ignoring the Pi) machine setup, if you’re out of town and nobody else has access to manually power it back up.

    I will admit NUT was one of the more convoluted things I ever set up, and one has to write their own scripts and such for it, but I find it worth the peace of mind knowing things shut down cleanly. Having them wake back up automatically is icing on the cake, even if my own setup is local only. There’s never a need, if I’m not home, to walk anyone over the phone through identifying which nondescript black rectangle needs its power button pushed.


  • __hetz@sh.itjust.workstoSelfhosted@lemmy.world•*Permanently Deleted*
    link
    fedilink
    English
    arrow-up
    8
    ·
    edit-2
    3 months ago

    I’m not sure if there’s a fundamental misunderstanding but I felt a need to clarify that NUT works with a UPS. It isn’t either or. Whether you’ve got a homelab or a single desktop PC, you need some piece of software which can see when the UPS goes “Oh shit, power is gone” and instruct the machine(s) to shut down cleanly. NUT is that software. If it wasn’t NUT then it’d be whatever software the UPS manufacturer either provides or recommends for your combination of UPS and OS.

    To the example of how one provides media to other devices inside (and possibly outside) the local network, although I get the broader idea, it really becomes a matter of scope, scale and taste. If my goal were to provide access to family members outside my home, friends, possibly friends of friends (either by intent or as a result of account sharing) then I’ll probably want monitoring. I’ll want a dead simple app any of them can install and point to a memorable URL. I’ll want alerts if someone in Romania or Shanghai attempts to log in with a friend’s account… You get the gist. If it’s not something that matters outside my house and I’m not going to repeatedly need to setup VPNs and map network drives for people, I could just spin up a Samba share and add it to the handful of devices in my home network and let those devices decide what application opens whatever media.

    In actuality I’m extremely small scale (serving only my home) and still prefer Jellyfin for its simplicity and transcoding. It’s simple enough to slap on cheap Android TV boxes and hand someone the remote. No real reason to watch it like a hawk. Nor to track bandwidth; I’ve got an excess for the house. The GPU is capable enough; an Arc A380 that’ll never have enough simultaneous transcodes to be a bottleneck.

    To answer the “why?,” I am one of those people that enjoys learning things that often feel like (or factually are) work. Maybe it’s self flagellation and I just refuse to admit it. I am a Factorio addict. But it’s also because tackling those things usually means the other users have an easier time. Mamma don’t wanna learn to drive the network to her laptop or search the app store for a file thingamajig what can connect to that tango or salsa or whatever just to scroll through a bunch of video file icons with the text so small she has to break out the Walgreens readers. She wants a shiny interface that’s swipe-able on a phone or tablet or navigable with a remote control. Pretty movie posters and bold legible titles. And I haven’t touched my config in months for that matter. Just a little bit of work has propped up a really enjoyable, ongoing show/movie watching experience. Definitely worth.


  • The problem is, contextually, this is a direct nod to the “ein volk, ein reich” shit of Nazi Germany. It is most certainly intended to be exactly that. For that reason it’s invigorating to the far right, white nationalist, christofascist crowd. It’s still appealing to the uneducated tone-deaf right who, like yourself, think (or are quick to excuse it as) “oh, it’s just a happy simple little slogan about bringing America together 🦅🇺🇸🎆🔫.” Which is great for the aforementioned fascists because they can hide behind that interpretation and know the people who only see it that way are dumb enough to continue to back them. Simultaneously it serves as a reminder to anyone not pasty enough of complexion that they are not welcome in the far right’s idea of America. They are not welcome as part of the “one.” “The melting pot has been switched off. Drop your culture and heritage at the door. If you assimilate maybe we’ll use you as a token but we still really don’t want you here.”

    I’m not one who is keen to ever hand over words, phrases, symbols and such to hatred. It sucks to let awful people appropriate them. But you’d need to have been living under a rock for the last decade to not see the obvious dog whistle for what it is. In a vacuum I wouldn’t see the problem either. Here on planet Earth you’d need to be deaf and blind to miss it.


  • Not a programmer either but I’ll throw in my anecdotes:

    • I was writing a “cog” for pycord (Python Discord bot framework). I wanted a slash command to hit an API for some reason or another. Whatever AI I was using hallucinated a non-existent endpoint to achieve that so, of course, it didn’t work. I wasted a half hour reading past and upcoming specs of the API to find that endpoint never existed and wasn’t going to exist in the next release. The code was structurally sound, pretty much identical to other functions I’d written by hand, but it reached out to something that does not exist. It did this with a popular, well-documented piece of software.
    • Speaking of structurally sound, there’s no real time save if I have to double back to make sure it filled in all the blanks correctly. If the AI can fuck up with an API that it should “know,” it’s a guarantee that will be necessary to correct everything when an AI has no knowledge of it whatsoever. So now time is spent making sure it isn’t referencing variables it failed to define, pointing to API endpoints that aren’t there, etc. I can define boilerplates and snippets in any decent text editor. An autocomplete plugin will fill out the entire structure of a function being defined the second I type def and leave me to fill in the blanks - all without deferring to a water and energy sucking, data mining, douchebag of a company. What’s being gained that isn’t costing me privacy, depriving myself the use of my own cognitive abilities, and ultimately making the world a little worse off?
    • Last one, I wrote a bash script years ago using exiv2 to pull the EXIF data and sort unsorted photos into ../YYYY/MM/DD/. directories. When the AI hype started gaining traction I tasked one with doing the same to see what it would do differently. Aside from some capitalization and variable names, it was identical. Now it’s not exactly a complicated task but my takeaway was either I’m a better programmer/scripter than I thought (not likely) or AI is just as bad (or worse) of a programmer as me. I’m leaning towards worse, considering I manage to actually know if an endpoint or variable exists before referencing it.

    Anyway, the only conclusion I can draw is those “programmers” are developing unmaintainable blackboxes out of twigs and playing cards. If some big bad wolf by the name of “Intellectual Debt” doesn’t inevitably come along to huff and puff, they’ll just end up collapsing under their own weight.


  • How are you liking it? I get a handful of channels off a set of cheap hoop/rabbit ears hooked direct to the TV, but I’ve been thinking about sticking a decent antenna up in the attic and an hdhomerun on a shelf in my rack (then add it to Jellyfin). I’m also a little concerned about investing that money and effort just to have the stations around here switch to DRM shortly after. I’m in the states and, as I understand, they haven’t been able to get approval for DRM decoding on their devices. Meanwhile there’s some chance of DRM becoming standard/mandatory(?) for OTA TV within the next year or so.