Well give us a link and let’s see if they are useful to any of us!

What… ?

Apple did this exact thing on iPhone and 3rd party stores so I would be surprised if this wasn’t already baked into the firmware on the Switch.

Is there any instructions for this now?

When I tried like 2 years ago the instruction were so terrible I just gave up.

It didn’t really explain how all the parts interacted and just assumed you knew everything about Matrix.

Almost all Bolts should have newish batteries or a stupid long warranty on the battery.

Degradation is not really a thing on thermally managed batteries, IE only as issue on the Nissan Leaf and the eGolf to lesser extend.

Lots of Bolts in Quebec if you are willing to have one shipped. ($1000-2000).

I really regret not getting one a year or two ago when their value was sort of tanked.

What size of car are you looking at?

Chevy Bolt has a 60kWh and will go over 200km in the winter and closer to 400km in the summer.

Lots of them around 15k CAD. Price has been creepying up in the last few weeks. I need to grab one myself.

This is what I found.

With Nebula and CuriosityStream, most of the things I follow are still on YouTube.

deleted by creator

There is a phone and it looks like also a MagSafe keyboard

I purchased a K1 Max directly from Creality in October 2024.

This was well after the K1 Max had recieved the K1C upgrades. People had been getting K1 Max units with the small X/Y pulleys and upgrade hot end for MONTHS.

I bought it directly from Creality expecting to get a current revision.

I received a rev1 unit. It had signs of use. I asked Creality to replace it with the current revision and they decline.

It never really printed right. Using their filament and their slicer about 40% of the prints would fail. They kept dragging me along for weeks. I assume this was to push me out of the return window.

They literally never one entertained my suggestion of returning.

Until I call my credit card company. VISA said to box it up, email them one last time demanding a return label for a full refund, and if they did not give me one, VISA would do a charge back.

Whilst boxing it up I noticed another shipping label from before the K1C was released.

So they had absolutely sold me a unit that was not brand new.

Now I have a Sovol SV08 and if I was looking for a new printer I would be looking at the Snapmaker U1

All two dongles I have used (Google, Apple) have a DAC.

I’m pretty sure the analog ones are the exception, not the rule.

Ah yes the BTTF Framing Fiasco!

I remember waiting like 2+ months for my fixed DVD to get mailed.

The Xperia 10 mk7 has all of that for a fraction of the price.

Just like the Xperia 1 you can’t officially get them in North America.

I thought my Asus G14 looked pretty normal.

Unfortunately it was a complete POS that never slept correctly or would randomly used the Nvidia GPU leading to like 2-3 hour battery life.

ThinkPad + Steamdeck is my new solution.

I flashed to mainline shortly after getting it. I didn’t have any issues with stock firmware, only swapped because if the cartographer.

If you don’t mind minor amounts of tinkering to get it good, it’s been great since switching to the Cartographer.

Terrible bed adhesive. Cleaned the bed multiple times. Tried with and without glue sticks. It had over 2mm of deviation.

Prints would always warp on the right side where the aux fan was blowing on them.

I had a K1 Max I got directly from Creality in October.

It would print ASA okay, but PETG and PLA failed like 75% of the time.

Switched to a Sovol SV08 with a cartographer and I can’t remember having a failed print since. I print almost exclusively in PETG now.