• rumba@lemmy.zip
    link
    fedilink
    English
    arrow-up
    1
    ·
    9 hours ago

    He could at least put a piece of split tubing in there to make the edges rubbery

    • Duamerthrax@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      8 hours ago

      You may have a GFCI connected to it somewhere. If wired correctly, you only need one in a chain to do the job. It could be under the sink or something.

    • normalexit@lemmy.world
      link
      fedilink
      arrow-up
      6
      ·
      19 hours ago

      GFCI outlets aren’t too expensive. If you own the place you should fix that. If you rent the place you should complain lol.

      • Empricorn@feddit.nl
        link
        fedilink
        English
        arrow-up
        5
        ·
        13 hours ago

        I don’t think non-GFCI outlets are even compliant with code in most places! If you rent the place, demand they be made safe. Or maybe someone reports a shock or a small electrical fire happens…?

      • starbrite@lemmy.zip
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        15 hours ago

        Don’t you need a ground wire for them to work? The electrical was put in in the 50s and so there is no ground, and rewiring the entire house is a headache

  • Caveman@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    15 hours ago

    He didn’t want to put the connector on the outside of the mirror with a cover covering the cut? So close for a proper looking outlet

    • usualsuspect191@lemmy.ca
      link
      fedilink
      arrow-up
      22
      ·
      1 day ago

      Which is why it’s so surprising they didn’t extend the box and love the receptacle out. Maybe this is just a cheeky picture taken during the dry fit of the mirror for the meme?

      • Akasazh@feddit.nl
        link
        fedilink
        arrow-up
        3
        ·
        16 hours ago

        Which is why it’s so surprising they didn’t extend the box and love the receptacle out.

        I know it’s a silly typo, yet my brain did the visualization

  • bobs_monkey@lemm.ee
    link
    fedilink
    arrow-up
    50
    ·
    edit-2
    1 day ago

    That is an ancient GFCI, grab one of these and make sure it trips and resets for your own safety.

    Edit: this guy

    • hovercat@lemmy.blahaj.zone
      link
      fedilink
      English
      arrow-up
      9
      ·
      edit-2
      1 day ago

      Unfortunately, these actually might not show if the GFI is working, and might give a false negative.

      If there is no equipment ground, the outlet must be labeled as such, but it is allowed by code so long as protected by GFI. However, since all these testers do is shunt hot to ground, if there’s no ground connected, it won’t work and appear if the GFI is not working. However, assuming it’s working, it will still do its job, since it they protect against ALL current leakage, and not just ones through the outlet’s ground path (otherwise they’d be pretty useless).

      I had a “landlord special” where they extended an old 2 wire box with no ground, and my PC case shocked the fuck out of me after I had the carpet cleaned and was walking on the damp floor. A ground would likely have dissapated that bit of current leakage, but also a GFI would have probably tripped when I touched it. They weren’t willing to run a new wire with a ground because, unsurprisingly they were cheap fucks, but I convinced them to install a GFI for safety at the very minimum.

      Also worth noting that these things are easy to fool for ground, since it’s bonded to neutral, and shitty electricians will tie them together at the outlet to trick the tester into seeing a “ground” when it’s actually neutral. It’s dangerous as fuck, and the only way to check is by taking the plate off and seeing if the outlet is properly wired.

      • bobs_monkey@lemm.ee
        link
        fedilink
        arrow-up
        3
        ·
        1 day ago

        Yeah, if there is no ground present (ie a 2 wire cable in a plastic or ungrounded metal box), they just won’t trip as the ground prong is effectively isolated.

        While not the best idea, you can usually derive a quick ground from a plumbing pipe, assuming copper or galvy pipes (pex obviously won’t work), or a metal gas pipe. I’ve done it in a pinch when a proper system ground wasn’t feasible, but only as a temporary measure.

    • bamboo@lemmy.blahaj.zone
      link
      fedilink
      English
      arrow-up
      4
      ·
      edit-2
      1 day ago

      Way less expensive to get a 10kΩ resistor and put that between earth and live to make sure the GFCI trips. Source

      EDIT: \s, don’t do this.

      • bobs_monkey@lemm.ee
        link
        fedilink
        arrow-up
        9
        ·
        1 day ago

        And run the risk of tickle time if you don’t know exactly what you’re doing lol. Those plug testers are an easy means for a layman to check it. They make ones as cheap as $5, that’s just the one I always have in my pocket as a professional electrician.

    • Empricorn@feddit.nl
      link
      fedilink
      English
      arrow-up
      1
      ·
      13 hours ago

      I’m not one of those people who think that just because I’m lawful and boring, privacy is unimportant. That said, if they went to this amount of expense and trouble to monitor an overweight, middle-aged dude applying deodorant and talking to his cat through an outlet… enjoy.

    • burgersc12@mander.xyz
      link
      fedilink
      English
      arrow-up
      1
      ·
      edit-2
      1 day ago

      I don’t see a camera hole in the middle, it also seems too old to be one, but who really knows.

  • Churbleyimyam@lemm.ee
    link
    fedilink
    arrow-up
    5
    ·
    1 day ago

    Landlord: The basin and mirror must be in the exact centre of the wall. Good bye.

    Tradesman: No problem.

  • Mickey7@lemmy.world
    link
    fedilink
    arrow-up
    3
    ·
    1 day ago

    First reaction was how fucking stupid are people. But then reading other comments here I have to ask myself are they also a pervert wanting to watch people in the bathroom