The joke is x.org (xwayland) is made by the same people that make wayland. Other x11 implementations often don’t support features that people ascribe to x11 as a whole.
- 4 Posts
- 410 Comments
esc@piefed.socialto
Technology@lemmy.world•Delivery drones are coming. For some with PTSD, that's a terrifying prospect.English
5·21 hours agoTbh, there is huge difference in sound of big ‘logistical’ drone and regular fpv drone (with or without cargo). Also it is possible to tune the drune to be not extremely loud. I would be far more concerned with safety of delivery drones for regular populace with regular pilots flying them, anyhow it’s not very relevant problem for a big chunk of the world.
esc@piefed.socialto
Technology@lemmy.world•NetBSD may have found a new role: The AI-free FOSS OSEnglish
12·2 days agothriving
esc@piefed.socialto
Technology@lemmy.world•NATO told guests at its flagship defence-industry conference to get around by Yandex Go, a Russian-owned taxi app.English
1·2 days agoTurkey which has relatively good relations with r*ssia
Do they? There is like once in a month story about katsaps wanting to start a war with Turkey for *daily reason*. So exactly like every other neighboring country more or less.
True, it’s just easy to remember.
Ffmpeg is tough but you should strive to
openssl.
It’s pretty simple
tar e[x]tract [z]is [f]ile [v]erbosely archive.tar.gz --directory=archivedirFor creation it’s pretty much the same but you need to specify [c]reate, e.g.
tar czvf archive.tar.gz filestoarchive/and for lis[t]ing it’s -tar tf archive.tar.gz
5-6-7-8 are sort of the same thing, just different protocols, they aren’t all that hard to connect to.
They are sorta, you are just looking at the wrong ones, 3b+ and 4b with 1 gb of ram are still pretty cheap, older ones are even cheaper.
They can be useful, but you won’tbe able to buy heart of this hardware offline with cash, mentioned lidars for example. Also it needs to be big-ish, while training or recreational drones barely bigger than tiny whoop with small battery and <50 grams of explosive and some shrapnel can do the trick. They can be printed or made locally from sheets, motors are common, with correctly configured PIDs and other parameters they can be not very loud, flight controllers cost almost nothing and can be found locally, etc., etc.
They don’t advertise anything about rescue of anyone in the post, obvious use case is marathons and other sports.
For military uses it’s semi useless. Lidars are expensive, can be easily seen by intended targets. Actual combat single use drones are flying without any gps most of the time, you can easily achieve last meters where you can’t see or control a drone with raspberry pi and a camera (easy, cheap, requires little expertise, triggered by switch on a radio).
Not really, gps isn’t all that reliable, when you are using consumer gps modules. When used in conjunction with other navigation systems in places where there is no gnss spoofing or jamming (which can be done by average individual and require little expenses) it works great.
Armed is a common word for a drone that has it’s motors working.
Yelled is a very loud word for what it is, it’s barely a whisper.
In the browser? Probably, yes, there are browser based vnc clients, but orca itself is pretty resource intensive. So not unless you have some beefy sbc or regular computer on your voron.
esc@piefed.socialto
3DPrinting@lemmy.world•Should I get a b*mbulab printer? + More newbie questionsEnglish
2·8 days agobbl a1 is a good machine, you can expect it to print fine. Most of the modern printers can, reliably, with exceptions like creality, where everytime it’s a lottery. I won’t recommend prusa unless you will find yourself being not only in the 3dprinting hobby but in a printers hobby as well. Anyway, start with simple, smaller projects, there is a learning curve, and don’t assume that everything will just work.
Good luck and have fun!
There is a repackaged appimage on AUR called
orca-slicer-bin, but I had problems with both Appimages and Flatpacks in recent releases. Fresh 2.5 has multiple reported visual bugs that affect me.
Personal opinion: New features are great, support for new-ish printers is great as well. I don’t like the new focus on Cloud Services.
They are cool (probably), but plugin functionality apparently requires an account there?
Also a lot of surface level bugs came with recent releases (especially on linux).
esc@piefed.socialto
Linux@lemmy.world•Ran into my first problem within Fedora KDE Plasma...English
2·9 days agoThis problemis finally fixed on KDE.



You don’t understand! Everything in life can be neatly categorized with two different completely opposite tags, that’s enough.