I do woodworking as a hobby. It doesn’t make money unless you invest in a full workshop and scale up production to the point where it would basically be a second job. Often the material costs alone are as much as it would cost to buy a completed item.

I’d still recommend it as a creative outlet though. There’s something satisfying about seeing that coffee table in the lounge and thinking “yeah I made that!”

My theory also is to have 3 hobbies but a different take: One that you can do at home when you have free time, I play guitar. One that gets you out of the house, I fly fish. One that gives you something to look forward to, I used to go on monthly backpacking trips but as I get older they’re turning into fishing trips

I do:

Yoga

Gardening

Baking (sourdough)

Do occasionally draw or paint too.

I think you have to find something you actually enjoy. If you are good at swimming, triathlon is a great idea but the long distance ones do take a lot of training time.

I don’t try to monetize hobbies anymore, it’s a drag.

3d printing and role-playing. I print miniatures that my friends and I paint. Then we use them in our games.

Triathlon is 3 hobbies!

3D printing, maille, video games, board games, and bicycling.

Hobbies are not for making money. That’s what a job is for. Hobbies are where you sink the money you have left from your job and all the other expenses are paid.

That said.

Hobbies for me include:

Hiking (lots of good trails nearby)

Making sounds on my Synth (I’m building a case right now)

TTRPGS (when you can wrangle enough folks)

Skirmish Games (mainly Gaslands)

Video games (slay the spire, and casual WoW)

Warning - do not make your creative/fun hobby the one that also makes you money. I’ve met several people who were into woodworking as a hobby, started doing it on commission for family, friends, referrals, etc, and it quickly became a job rather than a fun hobby. The timelines and demands that come with doing commissions killed it for them, they still occasionally do woodworking as gifts/favors, but very explicitly just for family and close friends without timelines, and only charge for materials

Electronics projects mostly.

Mostly smart home PCBs and interconnect boards and 3D modelled housings. Examples:

• esp32-C3 dumb doorbell (just a doorbell that sends an MQTT message and sleeps the rest of the time). It works fatastic except that my Proximus ISP modem/router completely fucked up and so the network is no longer usable and I had to set it in bridge mode to a router it can’t reach. I want to release it, but haven’t had the time to water - resistance test it or make assembly instructions
• esp32-S3 voice assistant satellite attached to an IR blaster, I2S mic, and PCM5102 to control and send audio to my old Yamaha RX-496RDS to control it via IR and can play audio (local or Spotify) via music assistant. Pretty much an Alexa echo attached to my speaker system. PCB link which I am planning on releasing.
• My unfinished Flight Stick with custom electronics, fully custom 3D printable housing, etc… It is almost done, but needs like 2 more small iterations, but we moved and started doing a full-strip renovation, so my 3D printer is no longer set up because it is too dusty inside, and I don’t want to spend another $100 doing a PCB test iteration to use a better ADC with less components. Eventually as firmware practice, I want to rewrite the firmware in Rust or something. I also just looked at the Repo and the quick logo I drew up has been modified somehow without any commit. I know for a fact it was correct before. Very weird.

I also have tons of new project ideas that I don’t have time for.

My other hobbies

• weightlifting, again completely dropped off due to every free moment renovating

• Running a home server with replacement services for everything I need

• Running (my motivation has been 0 recently…)

• cooking. I try to do a few new recipes per month

• gardening. With the renovation, I just grew a few courgettes, tomatoes, and squash this year

• video games (more of a de-stresser nowadays than a hobby, most recently casual rocket league with friends is fun, hadn’t played since 2018 or so)

3d printing. !3dprinting@lemmy.world

homebrewing !homebrewing@sopuli.xyz

baking !bready@lemmy.world

drooling over big thighs !thiccmoe@ani.social

I am a filthy hobby hopper and I spend most of my disposable income on these.

• Tinkering with retro game handhelds and sometimes playing them
• Tinkering with bikes and sometimes riding them
• Tinkering with DIY watches and sometimes using them to tell time
• Also bird photography

I own an LGS, so my hobbies have become part of my job. Before i opened i built and painted miniatures, and played a lot of miniature games. I also played RPGs and MTG quite a bit.

Now, i guess my hobbies would be my old job, audio engineering.

Boardgaming and RPGs kind of tie into my profession in design. I see my job as organizing information, so when I play games I’m just naturally working out ways to present the information for myself or other players as efficiently as possible. Or I’m writing/designing homebrew material because for some reason I get inspired sometimes.

My physical “hobby” is walking/exercise, though I have hard time calling that a hobby, it’s just something I do without thinking about it, it’d be like calling eating a hobby, it’s just something I do that seems important for my survival.

I’m heavily into sport kites. These are controllable kites with 2 or 4 lines. It’s an outdoor activity that can get fairly physical depending on what you are up to. There’s a very small community, mostly focused in coastal areas, but it exists all over the world.

Once you get some basic skills, most people shift toward flying to music as a ballet individually or with a group as a team. If you get good enough, there are travel opportunities where kite festivals pay for all or part of your travel expenses to perform at festivals. I’ve been all over the US and to 11 countries across the world to fly kites in my 18 years in the community.

Past that, there’s also kite making that is a nice extension of the hobby. I build my own sport kites, and build them for others on occasion. There are open source sport kite plans out there, I’ve got a few on my website (https://watty.us), but there are even more at https://kareloh.com.

A good starting place to get into the hobby might be https://sportkite.org, or some Facebook groups like Sport Kite Pilots Lounge.

I’ve been making mechanical keyboards “from scratch” for the last year or so. I leverage a lot of pre-built parts and existing tools of course, but I tweak the standard layouts to fit what I want to do, fabricate the plates and cases with my laser engraver and 3D printer, assemble everything, wire them up to the switches and the microcontroller (usually “dead bug” hand-wiring, but I have done a very basic PCB in KiCAD as well), and configure the firmware. It leverages a lot of my other interests, provides an opportunity to improve incrementally between projects, and results in a product that is legitimately pleasant to use.

Little bastards are piling up, though.