luckily this is just a 32; i had a 70 from the same brand with the same INSANELY FUCKING STUPID STAND DESIGN that i had to find something for…literally at the most extreme edges of the thing, what the fuck is this? this is so fucking stupid, it cannot be meaningfully cheaper than a proper design and it looks fucking dumb as hell and surely this has pissed off 90% of people that wanted a TV and want to put it on a little stand like a normal fucking person right??

  • Mitchie151@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    ·
    7 months ago

    Centre stands need to be way more sturdy to hold it up. You can buy aftermarket VESA centre stands though if you can’t wall mount it.

    • alvvayson@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      7 months ago

      This right here.

      The TV comes with the cheapest removable feet, because VESA mounts exist.

    • Vanon@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      7 months ago

      Exactly. I think an aftermarket VESA mount is pretty much required these days for modern TVs, that’s the bad news. The good news is that there are plenty of options (center base, wall, swivel, etc), some very affordable, and they should last for multiple TV generations (check VESA pattern, weight limits).

      But I get that these tiny, wide feet can be mind boggling at first, since TVs all used to have center stands for decades. Finally, TVs got too large, the cost savings and stability from two tiny feet won out over the alternative of the large, heavy single center base.

  • Carighan Maconar@lemmy.world
    link
    fedilink
    English
    arrow-up
    4
    ·
    7 months ago

    The wider the TV gets, the more stable a two-feet-at-the-ends design becomes compared to a single central foot.

    Plus if you need anything else, VESA mounts are super-standard and you just get whatever you need then use it on every Tv you buy.

    • sebinspace@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      edit-2
      7 months ago

      For those that live in apartments, there are VESA stands that mount to the back of your furniture, and others that use a clamp for tables, so you don’t have to put holes in your walls. I use one on my desk for a fairly wide monitor.

      If you’re unfamiliar with VESA mounts, just take note of which of the two standards your device uses. These are going to be either 75x75mm or 100x100mm. Verify with a ruler, don’t rely on the literature to be accurate.

      If you wanna be mega-bougie about it, you can get just the mounting plate, and there is couple hardware available to pair it with aluminum extrusion, if you really like that 2040/2080 extrusion.

  • glimse@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    7 months ago

    Putting a giant TV on a tiny stand is not normal… Be mildly infuriated at yourself, not the manufacturer

    • myplacedk@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      7 months ago

      Yep, the included feet are just something you might be able to use until you get a real mount.

      If you really want the TV to stand on furniture, buy a proper vesa mounted stand (they can be very cheap) and maybe even a proper TV table.

  • S_204@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    1
    ·
    7 months ago

    Op didn’t check the specs on the item he bought and is upset it’s not perfectly tailored to his individual tastes.

    You love to see it.

  • DingoBilly@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    7 months ago

    OP blaming their shitty decisions on others. Why are you buying something without knowing its dimensions?

    Fuck I hate people like this. The answer btw is pretty obvious. From a weight distribution perspective it’s easiest to have two feet as wide apart as possible.

  • 4am@lemm.ee
    link
    fedilink
    English
    arrow-up
    0
    ·
    7 months ago

    Nobody tell him about what TV makers expected of you when they were all CRTs…

    • Illuminostro@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      7 months ago

      When they weighed 70+ lbs.

      I’m old enough to remember when there were TV repairmen who came to your house.

      • Globulart@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        7 months ago

        I don’t get this mentality. I’ve rented for over a decade and always wall mounted my TVs. It’s not tricky to unmount and fill in 6 or 8 holes with a bit of filler.

        Do some renters really not hang pictures or put up shelves either? The effort to correct it is probably less work than it is to hang in the first place.

  • baatliwala@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    7 months ago

    How do you not do research on the dimensions of anything before buying something big like a TV?

    • Obi@sopuli.xyz
      link
      fedilink
      English
      arrow-up
      0
      ·
      7 months ago

      Mate I’ll have done a 3D reconstruction of the room accurate to the mm to test everything out. I’m only slightly exaggerating, I literally did exactly that when planning my new office/studio, had the room in 3D long before we got the house, built everything myself, custom desk, acoustic treatment, etc.